Buy sp-dg.be ?
We are moving the project
sp-dg.be .
Are you interested in purchasing the domain
sp-dg.be ?
domain@kv-gmbh.de · 0541-91531010
Buy sp-dg.be ?
'Green or SP?'
It ultimately depends on the specific context and the individual's preferences. "Green" typically refers to environmentally friendly practices and products, while "SP" could refer to a variety of things such as a specific brand, a type of food, or even a political party. Therefore, without more information, it's difficult to determine which option is being referred to. **
How can one recognize whether two carbons are sp- or sp-hybridized?
One can recognize whether two carbons are sp- or sp2-hybridized by looking at the number of sigma bonds and lone pairs around the carbon atoms. If a carbon atom is sp-hybridized, it will have two sigma bonds and no lone pairs. If a carbon atom is sp2-hybridized, it will have three sigma bonds and no lone pairs. Additionally, one can also look at the geometry around the carbon atoms - sp-hybridized carbons will have a linear geometry, while sp2-hybridized carbons will have a trigonal planar geometry. **
Similar search terms for Hertz-SPL-Show-SP
Top-Angebote
Products related to Hertz-SPL-Show-SP:
-
Hertz SPL Show SV 250.1The Hertz SPL Show SV 250.1 is a 10 inch (25 cm) mid-bass speaker. Rated power handling 250 W RMS and 500 W Peak with 4 Ohm impedance. Frequency response from 90 Hz to 7000 Hz and voice coil with a diameter of 50 mm. Magnet made of high-density ferrite, magnet size 155 x 70 x 20 mm, total weight 4 kg. Diaphragm made of ultra-light pressed paper and water-resistant paper diaphragm. Double wave, damped fabric surround. Features 10 inch (25 cm) mid-bass speaker Water-resistant paper diaphragm Diaphragm made of ultra-light pressed paper Double wave, damped fabric surround Magnet made of high-density ferrite Technical specifications Size 250 mm Power handling RMS 250 W Power handling Peak 500 W Impedance 4 Ohm Frequency response 90 Hz – 7000 Hz Voice coil diameter 50 mm Magnet size 155 x 70 x 20 mm Weight 4 kg D 209 mm Re 3.3 Ohm Fs 90 Hz Le 0.23 mH Vas 20 l Mms 26.5 g Cms 0.12 mm/N BL 10.7 T m Qts 0.40 Qes 0.42 Qms 12.1 SPL 101 dB A 257 mm B 232 mm C 108 mm D 101 mm100,07 €*Shipping: 14,40 €Secure redirect to the provider
-
Hertz SPL Show HP 802The Hertz SPL Show HP 802 is a 2-Channel Amplifier of Class AB with a total power of RMS 1800 Watts. The model operates with 11–15 V DC and is equipped with an oversized Power Supply and four toroidal transformers. The minimum load impedances are 1 Ohm in 2-channel operation and 2 Ohms in 1-channel operation. Integrated are Hi-Pass and Lo-Pass filters with 50–1k Hz or 500–10k Hz, a bandpass of 50–10k Hz, as well as a parametric equalizer with 50–1k Hz, Q 0.5–2, and Gain ±12. The bandwidth with filters disabled is 10–55k Hz, the damping factor is 500, and the signal-to-noise ratio is 103 dB. Connections are made via PRE IN, and a Pre-out Full-Range is available. The sensitivity of the preamplifier input is 0.3–5 VRMS (15 k Ω). The dimensions are 544 x 240 x 65.5 mm, and the weight is 7.5 kg. Distortion is 0.05% (100 Hz @ 4 Ω), Remote input 7–15 V DC with 1 mA. Features 2-Channel Amplifier Class AB Channels 2–1 Oversized Power Supply Four toroidal transformers INPUTS PRE IN Pre-out Full-Range Adjustable crossovers Hi-Pass 50–1k Hz or 500–10k Hz Lo-Pass 50–1k Hz or 500–10k Hz Bandpass 50–10k Hz (HI) and 50–10k Hz (LO) Equalizer 50–1k Hz, Q 0.5–2, Gain ±12 Size 544 x 240 x 65.5 mm Weight 7.5 kg Technical Specifications Supply voltage 11–15 V DC 4 x 30 A Idle current (on/off) 0.04 mA Consumption at 1 Ohm, 14.4 V DC (max. music power) 100 A Remote input 7–15 V DC, 1 mA Distortion (100 Hz @ 4 Ohm) 0.05% Bandwidth (filters off) 10–55k Hz Signal-to-noise ratio (A weighted @ 1 V) 103 dB Damping factor (100 Hz @ 4 Ohm) 500 Pre-In sensitivity 0.3–5 VRMS (15 k Ω) Load impedance (min) 1 Ohm (2 channels) Load impedance (min) 2 Ohms (1 channel) Output power RMS @ 14.4 V DC, THD 1% 330 W x 2 (4 Ohm) Output power RMS @ 14.4 V DC, THD 1% 550 W x 2 (2 Ohm) Output power RMS @ 14.4 V DC, THD 1% 800 W x 2 (1 Ohm) Output power RMS @ 14.4 V DC, THD 1% 1100 W x 1 (4 Ohm) Output power RMS @ 14.4 V DC, THD 1% 1600 W x 1 (2 Ohm) Output power RMS @ 14.4 V DC, THD 10% 380 W x 2 (4 Ohm) Output power RMS @ 14.4 V DC, THD 10% 630 W x 2 (2 Ohm) Output power RMS @ 14.4 V DC, THD 10% 900 W x 2 (1 Ohm) Output power RMS @ 14.4 V DC, THD 10% 1260 W x 1 (4 Ohm) Output power RMS @ 14.4 V DC, THD 10% 1800 W x 1 (2 Ohm) Total power RMS 1800 Watts Size A 544 mm Size B 524 mm Size C 240 mm Size D 182 mm Size E 65 mm717,24 €*Shipping: 0,00 €Secure redirect to the provider
-
Hertz SPL Show SS 12 D2The Hertz SPL Show SS 12 D2 is a 12-inch (30 cm) Subwoofer with 1000 W RMS power and 2000 W Peak. It features a 75 mm dual voice coil (2 + 2 Ohm) in a 4-layer configuration on a frame with ventilation holes. A progressive double-layer spider, a multi-layer foam surround, as well as oversized suspension and connection cables are integrated. The magnet assembly is a large ferrite construction. The cone is made of non-pressed paper with cotton fiber. 12 AWG high-current nickel-plated connectors are present. The installation depth is 184 mm, the weight is 8.8 kg, the outer diameter is 320 mm, and the mounting hole is 283 mm. The linear excursion Xmax is 15.4 mm, and the mechanical excursion Xmech is 20.7 mm. Features 12-inch (30 cm) Subwoofer RMS power: 1000 W Peak power: 2000 W Impedance: 2 + 2 Ohm (Dual) Dual voice coil, 4-layer, frame with ventilation holes Voice coil diameter: 75 mm Progressive double-layer spider Multi-layer foam surround Oversized suspension and connection cables Large ferrite magnet assembly 12 AWG high-current nickel-plated connectors Diaphragm: non-pressed paper with cotton fiber Installation depth: 184 mm Outer diameter: 320 mm Mounting hole: 283 mm Weight: 8.8 kg Technical Specifications Size: 300 mm Voice coil type: Dual Magnet size (W x D x H): 170 x 90 x 40 mm Xmax: 15.4 mm Xmech: 20.7 mm Effective diameter D: 253 mm Re: 0.96 Ohm Fs: 36 Hz Le: 0.9 mH Vas: 24.52 l Mms: 282.8 g Cms: 0.07 mm/N BL: 9.37 T*m Qts: 0.64 Qes: 0.70 Qms: 7.0 Sensitivity: 86 dB Physical dimensions: A 320 mm, B 283 mm, C 184 mm, D 161 mm Enclosure (sealed): Volume 35 l, FC 47 Hz, Qtc 0.83, B 500 mm, H 400 mm, T 270 mm, mounting hole 283 mm, material thickness 19 mm Panel cut (sealed): A 500 x 400 mm (2x), B 500 x 232 mm (2x), C 362 x 232 mm (2x) Enclosure (reflex): Volume 55 l, Fb 51 Hz, B 550 mm, H 400 mm, T 380 mm, mounting hole 283 mm, material thickness 19 mm, port inner diameter 160 mm, port length 300 mm Panel cut (reflex): A 550 x 400 mm (2x), B 550 x 342 mm (2x), C 362 x 342 mm (2x)200,12 €*Shipping: 0,00 €Secure redirect to the provider
-
Hertz SPL Show SS 15 D2Hertz SPL Show SS 15 D2 is a 15 inch Subwoofer with 38 cm nominal size and 2 + 2 Ohm dual voice coil. The voice coil has a diameter of 75 mm in 4-layer configuration, the RMS power handling is 1200 W and the peak power handling is 2400 W. The diaphragm is made of non-pressed paper with cotton fiber, the magnet is made of ferrite with dimensions 180 x 90 x 40 mm. The installation depth is 210 mm, the weight is 10.1 kg, and the total diameter is specified as 380 mm. Xmax is 15.4 mm, Xmech 20.7 mm, the resonance frequency Fs is 31 Hz and Vas is 68.83 l. Re is 0.96 Ohm, Le 1 mH, SPL 88 dB, BL 10 Tm, Qts 0.61, Qes 0.66, and Qms 7.4. Equipped with 12 AWG nickel-plated connectors, multi-layer foam surround, double-layer spider with progressive profile, as well as oversized suspension and connection cables. Features 15 inch 38 cm Subwoofer RMS power 1200 W Peak power 2400 W Impedance 2 + 2 Ohm Dual voice coil 75 mm, 4-layer Diaphragm non-pressed paper with cotton fiber Multi-layer foam surround Double-layer spider with progressive profile Oversized suspension and connection cables Ferrite magnet 12 AWG nickel-plated connectors Diameter 380 mm Installation depth 210 mm Mounting hole 353 mm Magnet size 180 x 90 x 40 mm Weight 10.1 kg Xmax 15.4 mm Xmech 20.7 mm Technical data Voice coil type dual Voice coil Ø 75 mm Re 0.96 Ohm Fs 31 Hz Le 1 mH Vas 68.83 l Mms 361 g Cms 0.07 mm/N BL 10 Tm Qts 0.61 Qes 0.66 Qms 7.4 SPL 88 dB D 323 mm Size 380 mm Depth 210 mm Magnet Ferrite Weight 10.1 kg Magnet size 180 x 90 x 40 mm Physical specifications A 390 mm, B 353 mm, C 210 mm, D 188 mm Sealed Box Volume 80 l Sealed Box FC 42 Hz Sealed Box Qtc 0.83 Sealed Box External dimensions W x H x D 700 x 480 x 330 mm Sealed Box Mounting hole 353 mm Sealed Box Wood thickness 19 mm Sheet cutting list sealed A 700 x 480 mm Quantity 2 Sheet cutting list sealed B 700 x 292 mm Quantity 2 Sheet cutting list sealed C 442 x 292 mm Quantity 2 Reflex Box Volume 120 l Reflex Box Fb 38 Hz Reflex Box External dimensions W x H x D 900 x 480 x 380 mm Reflex Box Mounting hole 353 mm Reflex Box Wood thickness 19 mm Reflex Box BR-Port Inner diameter 160 mm Reflex Box BR-Port Length 220 mm Sheet cutting list Reflex A 900 x 480 mm Quantity 2 Sheet cutting list Reflex B 900 x 342 mm Quantity 2 Sheet cutting list Reflex C 442 x 342 mm Quantity 2285,94 €*Shipping: 0,00 €Secure redirect to the provider
-
How can I best properly charge the battery of the Gameboy Advance SP (GBA SP)?
To properly charge the battery of the Gameboy Advance SP, you should use the original charger that came with the device. Make sure to plug the charger into a power outlet and then connect it to the GBA SP. Allow the device to charge for the recommended amount of time, which is typically around 3 hours for a full charge. It's important to avoid overcharging the battery, so be sure to unplug the charger once the device is fully charged. Additionally, it's a good idea to periodically let the battery fully drain before recharging to help maintain its overall lifespan. **
-
Can the SP lock be lifted?
Yes, the SP lock can be lifted. This can usually be done by contacting the service provider and requesting to have the lock removed. The process may involve providing proof of ownership of the device and may also require settling any outstanding financial obligations. Once the necessary steps are completed, the SP lock can be lifted, allowing the device to be used with other carriers. **
-
How does the SP exam proceed?
The SP exam, also known as the Standardized Patient exam, typically proceeds with the examinee interacting with trained actors who portray specific scenarios or medical conditions. The examinee is required to conduct a medical interview, perform a physical examination, and demonstrate communication skills. The SP exam is designed to assess the examinee's clinical skills, professionalism, and ability to interact with patients in a realistic setting. After the exam, feedback is provided to help the examinee improve their performance. **
-
How does the SP exam work?
The SP exam, or Speaking Proficiency Exam, is designed to assess a person's ability to communicate effectively in a target language. During the exam, the test taker engages in a conversation with an examiner, discussing various topics and demonstrating their language skills. The examiner evaluates the test taker's proficiency based on their vocabulary, grammar, pronunciation, and overall communication abilities. The SP exam is a common assessment tool used in language learning programs and is often required for language proficiency certifications or academic purposes. **
What is a GBA SP expert?
A GBA SP expert is someone who is highly knowledgeable and skilled in all aspects of the Game Boy Advance SP, including its hardware, software, and accessories. They are familiar with the device's features, capabilities, and limitations, and are able to troubleshoot and repair any issues that may arise. GBA SP experts are also well-versed in the library of games available for the system and can provide recommendations and tips for optimal gameplay. Overall, a GBA SP expert is someone who is passionate about the device and has extensive expertise in all things related to the Game Boy Advance SP. **
What does tp sp dp music mean?
TP SP DP music refers to the three main components of a music production process: tracking (TP), signal processing (SP), and delivery (DP). Tracking involves recording the individual parts of a song or composition. Signal processing involves editing, mixing, and mastering the recorded tracks to enhance the sound quality. Delivery refers to the final stage of the production process, where the finished product is prepared for distribution to the audience. **
Top-Angebote
Products related to Hertz-SPL-Show-SP:
-
Hertz SPL Show SP 1.900The SPL Show SP 1.900 from Hertz is a 1-Channel Amplifier with an Advanced D-Class output stage and an efficiency of up to 87 percent. The device delivers a nominal power of up to 1000 watts RMS at 1 ohm impedance with a compact housing size of 211.6 x 130 x 49 mm. Technical features include an adjustable low-pass filter between 50 and 250 Hz as well as bass boost at 45 Hz. The amplifier is certified to protection class IP55 and is designed for an operating temperature range of 0 °C to 55 °C. The power supply operates with a voltage of 11 to 15 VDC with a standby current of 1.1 A. Features 1-Channel Amplifier Advanced D-Class output stage Efficiency of 87 percent Compact design with 211.6 x 130 x 49 mm Protection class IP55 Adjustable crossovers Low-pass filter: 50 - 250 Hz at 24 dB/Oct. Bass boost: 45 Hz (0 - 8 dB) Subsonic filter: 25 Hz at 24 dB/Oct. Signal-to-noise ratio: 95 dBA Weight: 2.15 kg Technical Specifications Power: 600 watts RMS at 4 ohm Power: 1000 watts RMS at 2 ohm Power: 1000 watts RMS at 1 ohm Nominal supply voltage: 11 - 15 VDC Pulsed operating voltage: 6 - 16 VDC Standby current: 1.1 A Damping factor: >300 Bandwidth: 5 Hz - 500 Hz Preamp sensitivity: 0.6 - 6 VRMS Speaker sensitivity: 2.2 - 22 VRMS Dimensions (W x D x H): 211.6 x 130 x 49 mm381,56 €*Shipping: 0,00 €Secure redirect to the provider
-
Hertz SPL Show HD14HThe Hertz SPL Show HD14H is an Installation Accessories for Harley-Davidson motorcycles. The kit includes precision-crafted saddlebag covers designed to accommodate Hertz 690 NEO.1 speakers. A plug-and-play speaker wiring harness allows for direct connection to the existing audio system without complex wiring. The package also includes 6 x 9 inch speaker mounts and Speaker Grille. A cut-out template and all necessary mounting parts are included for installation. The system is designed for a custom fit and durability of the materials used. Speakers are not included in the kit. Features Harley-Davidson Motorcycle Installation Accessories Saddlebag covers for Hertz 690 NEO.1 speakers Plug-and-play speaker wiring harness 6 x 9 inch speaker mounts (152 x 229 mm) Speaker Grille Cut-out template Mounting accessories including all mounting parts Materials for high durability333,74 €*Shipping: 0,00 €Secure redirect to the provider
-
Hertz SPL Show SV 250.1The Hertz SPL Show SV 250.1 is a 10 inch (25 cm) mid-bass speaker. Rated power handling 250 W RMS and 500 W Peak with 4 Ohm impedance. Frequency response from 90 Hz to 7000 Hz and voice coil with a diameter of 50 mm. Magnet made of high-density ferrite, magnet size 155 x 70 x 20 mm, total weight 4 kg. Diaphragm made of ultra-light pressed paper and water-resistant paper diaphragm. Double wave, damped fabric surround. Features 10 inch (25 cm) mid-bass speaker Water-resistant paper diaphragm Diaphragm made of ultra-light pressed paper Double wave, damped fabric surround Magnet made of high-density ferrite Technical specifications Size 250 mm Power handling RMS 250 W Power handling Peak 500 W Impedance 4 Ohm Frequency response 90 Hz – 7000 Hz Voice coil diameter 50 mm Magnet size 155 x 70 x 20 mm Weight 4 kg D 209 mm Re 3.3 Ohm Fs 90 Hz Le 0.23 mH Vas 20 l Mms 26.5 g Cms 0.12 mm/N BL 10.7 T m Qts 0.40 Qes 0.42 Qms 12.1 SPL 101 dB A 257 mm B 232 mm C 108 mm D 101 mm100,07 €*Shipping: 14,40 €Secure redirect to the provider
-
Hertz SPL Show HP 802The Hertz SPL Show HP 802 is a 2-Channel Amplifier of Class AB with a total power of RMS 1800 Watts. The model operates with 11–15 V DC and is equipped with an oversized Power Supply and four toroidal transformers. The minimum load impedances are 1 Ohm in 2-channel operation and 2 Ohms in 1-channel operation. Integrated are Hi-Pass and Lo-Pass filters with 50–1k Hz or 500–10k Hz, a bandpass of 50–10k Hz, as well as a parametric equalizer with 50–1k Hz, Q 0.5–2, and Gain ±12. The bandwidth with filters disabled is 10–55k Hz, the damping factor is 500, and the signal-to-noise ratio is 103 dB. Connections are made via PRE IN, and a Pre-out Full-Range is available. The sensitivity of the preamplifier input is 0.3–5 VRMS (15 k Ω). The dimensions are 544 x 240 x 65.5 mm, and the weight is 7.5 kg. Distortion is 0.05% (100 Hz @ 4 Ω), Remote input 7–15 V DC with 1 mA. Features 2-Channel Amplifier Class AB Channels 2–1 Oversized Power Supply Four toroidal transformers INPUTS PRE IN Pre-out Full-Range Adjustable crossovers Hi-Pass 50–1k Hz or 500–10k Hz Lo-Pass 50–1k Hz or 500–10k Hz Bandpass 50–10k Hz (HI) and 50–10k Hz (LO) Equalizer 50–1k Hz, Q 0.5–2, Gain ±12 Size 544 x 240 x 65.5 mm Weight 7.5 kg Technical Specifications Supply voltage 11–15 V DC 4 x 30 A Idle current (on/off) 0.04 mA Consumption at 1 Ohm, 14.4 V DC (max. music power) 100 A Remote input 7–15 V DC, 1 mA Distortion (100 Hz @ 4 Ohm) 0.05% Bandwidth (filters off) 10–55k Hz Signal-to-noise ratio (A weighted @ 1 V) 103 dB Damping factor (100 Hz @ 4 Ohm) 500 Pre-In sensitivity 0.3–5 VRMS (15 k Ω) Load impedance (min) 1 Ohm (2 channels) Load impedance (min) 2 Ohms (1 channel) Output power RMS @ 14.4 V DC, THD 1% 330 W x 2 (4 Ohm) Output power RMS @ 14.4 V DC, THD 1% 550 W x 2 (2 Ohm) Output power RMS @ 14.4 V DC, THD 1% 800 W x 2 (1 Ohm) Output power RMS @ 14.4 V DC, THD 1% 1100 W x 1 (4 Ohm) Output power RMS @ 14.4 V DC, THD 1% 1600 W x 1 (2 Ohm) Output power RMS @ 14.4 V DC, THD 10% 380 W x 2 (4 Ohm) Output power RMS @ 14.4 V DC, THD 10% 630 W x 2 (2 Ohm) Output power RMS @ 14.4 V DC, THD 10% 900 W x 2 (1 Ohm) Output power RMS @ 14.4 V DC, THD 10% 1260 W x 1 (4 Ohm) Output power RMS @ 14.4 V DC, THD 10% 1800 W x 1 (2 Ohm) Total power RMS 1800 Watts Size A 544 mm Size B 524 mm Size C 240 mm Size D 182 mm Size E 65 mm717,24 €*Shipping: 0,00 €Secure redirect to the provider
-
'Green or SP?'
It ultimately depends on the specific context and the individual's preferences. "Green" typically refers to environmentally friendly practices and products, while "SP" could refer to a variety of things such as a specific brand, a type of food, or even a political party. Therefore, without more information, it's difficult to determine which option is being referred to. **
-
How can one recognize whether two carbons are sp- or sp-hybridized?
One can recognize whether two carbons are sp- or sp2-hybridized by looking at the number of sigma bonds and lone pairs around the carbon atoms. If a carbon atom is sp-hybridized, it will have two sigma bonds and no lone pairs. If a carbon atom is sp2-hybridized, it will have three sigma bonds and no lone pairs. Additionally, one can also look at the geometry around the carbon atoms - sp-hybridized carbons will have a linear geometry, while sp2-hybridized carbons will have a trigonal planar geometry. **
-
How can I best properly charge the battery of the Gameboy Advance SP (GBA SP)?
To properly charge the battery of the Gameboy Advance SP, you should use the original charger that came with the device. Make sure to plug the charger into a power outlet and then connect it to the GBA SP. Allow the device to charge for the recommended amount of time, which is typically around 3 hours for a full charge. It's important to avoid overcharging the battery, so be sure to unplug the charger once the device is fully charged. Additionally, it's a good idea to periodically let the battery fully drain before recharging to help maintain its overall lifespan. **
-
Can the SP lock be lifted?
Yes, the SP lock can be lifted. This can usually be done by contacting the service provider and requesting to have the lock removed. The process may involve providing proof of ownership of the device and may also require settling any outstanding financial obligations. Once the necessary steps are completed, the SP lock can be lifted, allowing the device to be used with other carriers. **
Similar search terms for Hertz-SPL-Show-SP
-
Hertz SPL Show SS 12 D2The Hertz SPL Show SS 12 D2 is a 12-inch (30 cm) Subwoofer with 1000 W RMS power and 2000 W Peak. It features a 75 mm dual voice coil (2 + 2 Ohm) in a 4-layer configuration on a frame with ventilation holes. A progressive double-layer spider, a multi-layer foam surround, as well as oversized suspension and connection cables are integrated. The magnet assembly is a large ferrite construction. The cone is made of non-pressed paper with cotton fiber. 12 AWG high-current nickel-plated connectors are present. The installation depth is 184 mm, the weight is 8.8 kg, the outer diameter is 320 mm, and the mounting hole is 283 mm. The linear excursion Xmax is 15.4 mm, and the mechanical excursion Xmech is 20.7 mm. Features 12-inch (30 cm) Subwoofer RMS power: 1000 W Peak power: 2000 W Impedance: 2 + 2 Ohm (Dual) Dual voice coil, 4-layer, frame with ventilation holes Voice coil diameter: 75 mm Progressive double-layer spider Multi-layer foam surround Oversized suspension and connection cables Large ferrite magnet assembly 12 AWG high-current nickel-plated connectors Diaphragm: non-pressed paper with cotton fiber Installation depth: 184 mm Outer diameter: 320 mm Mounting hole: 283 mm Weight: 8.8 kg Technical Specifications Size: 300 mm Voice coil type: Dual Magnet size (W x D x H): 170 x 90 x 40 mm Xmax: 15.4 mm Xmech: 20.7 mm Effective diameter D: 253 mm Re: 0.96 Ohm Fs: 36 Hz Le: 0.9 mH Vas: 24.52 l Mms: 282.8 g Cms: 0.07 mm/N BL: 9.37 T*m Qts: 0.64 Qes: 0.70 Qms: 7.0 Sensitivity: 86 dB Physical dimensions: A 320 mm, B 283 mm, C 184 mm, D 161 mm Enclosure (sealed): Volume 35 l, FC 47 Hz, Qtc 0.83, B 500 mm, H 400 mm, T 270 mm, mounting hole 283 mm, material thickness 19 mm Panel cut (sealed): A 500 x 400 mm (2x), B 500 x 232 mm (2x), C 362 x 232 mm (2x) Enclosure (reflex): Volume 55 l, Fb 51 Hz, B 550 mm, H 400 mm, T 380 mm, mounting hole 283 mm, material thickness 19 mm, port inner diameter 160 mm, port length 300 mm Panel cut (reflex): A 550 x 400 mm (2x), B 550 x 342 mm (2x), C 362 x 342 mm (2x)200,12 €*Shipping: 0,00 €Secure redirect to the provider
-
Hertz SPL Show SS 15 D2Hertz SPL Show SS 15 D2 is a 15 inch Subwoofer with 38 cm nominal size and 2 + 2 Ohm dual voice coil. The voice coil has a diameter of 75 mm in 4-layer configuration, the RMS power handling is 1200 W and the peak power handling is 2400 W. The diaphragm is made of non-pressed paper with cotton fiber, the magnet is made of ferrite with dimensions 180 x 90 x 40 mm. The installation depth is 210 mm, the weight is 10.1 kg, and the total diameter is specified as 380 mm. Xmax is 15.4 mm, Xmech 20.7 mm, the resonance frequency Fs is 31 Hz and Vas is 68.83 l. Re is 0.96 Ohm, Le 1 mH, SPL 88 dB, BL 10 Tm, Qts 0.61, Qes 0.66, and Qms 7.4. Equipped with 12 AWG nickel-plated connectors, multi-layer foam surround, double-layer spider with progressive profile, as well as oversized suspension and connection cables. Features 15 inch 38 cm Subwoofer RMS power 1200 W Peak power 2400 W Impedance 2 + 2 Ohm Dual voice coil 75 mm, 4-layer Diaphragm non-pressed paper with cotton fiber Multi-layer foam surround Double-layer spider with progressive profile Oversized suspension and connection cables Ferrite magnet 12 AWG nickel-plated connectors Diameter 380 mm Installation depth 210 mm Mounting hole 353 mm Magnet size 180 x 90 x 40 mm Weight 10.1 kg Xmax 15.4 mm Xmech 20.7 mm Technical data Voice coil type dual Voice coil Ø 75 mm Re 0.96 Ohm Fs 31 Hz Le 1 mH Vas 68.83 l Mms 361 g Cms 0.07 mm/N BL 10 Tm Qts 0.61 Qes 0.66 Qms 7.4 SPL 88 dB D 323 mm Size 380 mm Depth 210 mm Magnet Ferrite Weight 10.1 kg Magnet size 180 x 90 x 40 mm Physical specifications A 390 mm, B 353 mm, C 210 mm, D 188 mm Sealed Box Volume 80 l Sealed Box FC 42 Hz Sealed Box Qtc 0.83 Sealed Box External dimensions W x H x D 700 x 480 x 330 mm Sealed Box Mounting hole 353 mm Sealed Box Wood thickness 19 mm Sheet cutting list sealed A 700 x 480 mm Quantity 2 Sheet cutting list sealed B 700 x 292 mm Quantity 2 Sheet cutting list sealed C 442 x 292 mm Quantity 2 Reflex Box Volume 120 l Reflex Box Fb 38 Hz Reflex Box External dimensions W x H x D 900 x 480 x 380 mm Reflex Box Mounting hole 353 mm Reflex Box Wood thickness 19 mm Reflex Box BR-Port Inner diameter 160 mm Reflex Box BR-Port Length 220 mm Sheet cutting list Reflex A 900 x 480 mm Quantity 2 Sheet cutting list Reflex B 900 x 342 mm Quantity 2 Sheet cutting list Reflex C 442 x 342 mm Quantity 2285,94 €*Shipping: 0,00 €Secure redirect to the provider
-
Hertz SPL Show SV 165 NeoThe SPL Show SV 165 Neo is a 6.5 inch (16.5 cm) mid-bass speaker from Hertz with Neodymium Magnet N38 H and lightweight design. The cones are splash water and UV-resistant, and the diaphragm is made of water-repellent pressed paper. Motor units are cataphoretically treated, connection wires are insulated and oxidation-treated. Connections and mounting holes are compatible for installation on Harley-Davidson motorcycles. Nominal impedance is 4 Ohm, RMS power is 150 W, and peak power is 400 W. The frequency response ranges from 100 to 10,000 Hz, and the voice coil has Ø 38.6 mm. Features 6.5 inch (16.5 cm) mid-bass speaker Manufacturer: Hertz RMS Power: 150 W Peak Power: 400 W Impedance: 4 Ohm Neodymium Magnet N38 H Splash water and UV-resistant cones Diaphragm: water-repellent pressed paper Cataphoretically treated motor units Insulated, oxidation-treated connection wires Connections and mounting holes compatible with Harley-Davidson motorcycles Weight: 0.9 kg Technical Specifications Size: 165 mm Voice Coil: Ø 38.6 mm Frequency Response: 100–10,000 Hz Magnet Size (W x D x H): 70 x 45 x 7 mm Magnet: Neodymium Effective Diameter (D): 128 mm Re: 3.2 Ohm Fs: 110 Hz Le: 0.06 mH Vas: 3.55 l Mms: 14.7 g Cms: 0.15 mm/N BL: 6.5 T·m Qts: 0.58 Qes: 0.62 Qms: 8.7 Sound Pressure Level (SPL): 97 dB A: 167.2 mm B: 143.3 mm C: 65.2 mm D: 57.1 mm184,62 €*Shipping: 0,00 €Secure redirect to the provider
-
Hertz SPL Show SX 165 NeoSPL Show SX 165 Neo is a 6.5 inch (16.5 cm) coaxial speaker from Hertz. The membrane is made of water-repellent, UV and moisture-resistant press paper. A double-layer copper voice coil wound on a polyamide former is integrated. Special neodymium magnets N38 H are used for drive. The Hi-SPL PEI dome tweeter with 35.56 mm features a resettable short-circuit protection. The size is 165 mm, and the weight is 0.94 kg per speaker. The frequency response ranges from 100 to 20,000 Hz, and the sensitivity is 96.5 dB. Connections via double Faston terminals. Features 6.5 inch (16.5 cm) coaxial speaker Water-repellent, UV and moisture-resistant press paper cone Double-layer copper voice coil on polyamide former Hi-SPL PEI dome tweeter 35.56 mm with resettable short-circuit protection Special neodymium magnets N38 H (woofer and tweeter) Double Faston terminals Weight per speaker 0.94 kg Technical data Size 165 mm Power handling RMS 100 W Power handling peak 200 W Impedance 4 Ohm Frequency response 100–20,000 Hz Sensitivity 96.5 dB Woofer voice coil Ø 38 mm Tweeter voice coil Ø 28 mm Woofer magnet size B x T x H 70 x 45 x 7 mm Tweeter magnet size B x H 19 x 3 mm Woofer magnet special neodymium N38 H Tweeter magnet special neodymium N38 H Membrane water-repellent press paper D 128 mm Re 3.3 Ohm Fs 110 Hz Le 0.061 mH Vas 4.92 liters Mms 10.14 g Cms 0.21 mm/N BL 5.83 T*m Qts 0.64 Qes 0.68 Qms 9.7 A 167.2 mm B 143.3 mm C 69.5 mm D 57.8 mm164,89 €*Shipping: 0,00 €Secure redirect to the provider
-
How does the SP exam proceed?
The SP exam, also known as the Standardized Patient exam, typically proceeds with the examinee interacting with trained actors who portray specific scenarios or medical conditions. The examinee is required to conduct a medical interview, perform a physical examination, and demonstrate communication skills. The SP exam is designed to assess the examinee's clinical skills, professionalism, and ability to interact with patients in a realistic setting. After the exam, feedback is provided to help the examinee improve their performance. **
-
How does the SP exam work?
The SP exam, or Speaking Proficiency Exam, is designed to assess a person's ability to communicate effectively in a target language. During the exam, the test taker engages in a conversation with an examiner, discussing various topics and demonstrating their language skills. The examiner evaluates the test taker's proficiency based on their vocabulary, grammar, pronunciation, and overall communication abilities. The SP exam is a common assessment tool used in language learning programs and is often required for language proficiency certifications or academic purposes. **
-
What is a GBA SP expert?
A GBA SP expert is someone who is highly knowledgeable and skilled in all aspects of the Game Boy Advance SP, including its hardware, software, and accessories. They are familiar with the device's features, capabilities, and limitations, and are able to troubleshoot and repair any issues that may arise. GBA SP experts are also well-versed in the library of games available for the system and can provide recommendations and tips for optimal gameplay. Overall, a GBA SP expert is someone who is passionate about the device and has extensive expertise in all things related to the Game Boy Advance SP. **
-
What does tp sp dp music mean?
TP SP DP music refers to the three main components of a music production process: tracking (TP), signal processing (SP), and delivery (DP). Tracking involves recording the individual parts of a song or composition. Signal processing involves editing, mixing, and mastering the recorded tracks to enhance the sound quality. Delivery refers to the final stage of the production process, where the finished product is prepared for distribution to the audience. **
* All prices are inclusive of VAT and, if applicable, plus shipping costs. The offer information is based on the details provided by the respective shop and is updated through automated processes. Real-time updates do not occur, so deviations can occur in individual cases. ** Note: Parts of this content were created by AI.